CLIPSAL Impress Z Wave Sgl Dimmer Switch – Z Wave Qubino 1 Gang Smart Dimmer Switch
This is an updated version of the Z-Wave Dimmer Lighting Set with improved functionality.
This CLIPSAL Impress Z Wave Sgl Dimmer Switch set allows you to control a single lighting circuit with Z-Wave.
It allows for remote control using a connected Z-Wave gateway or manual control using the momentary/push button.
The set contains:
- One QUBINO Z-Wave Dimmer InWall Controller
- One Clipsal 1 Gang Impress Series Wall Plate
- One Clipsal Impress momentary/push button
The QUBINO Z-Wave Dim Clipsal Impress InWall Controller (by GOAP) includes additional features compared to the previous dimmer used in this set.
It uses the latest 500 Series Z-Wave chip, has a greater communication range and is fully integrated with Vera ADD Wizards as “Qubino Flush Dimmer ZMNHDD1”.
It also allows for 2-3 way wired switching.
CLIPSAL Impress Z Wave Sgl Dimmer Switch Series Wall Plates are available in the following colours; Chrome, Gold, Brushed Aluminium, Brushed Brass and White. Please specify the colour in your order comments.
An LED option is available for the Clipsal buttons.
The LED is always on and helps you to locate the button in the dark.
You can order the LED option for your buttons by clicking here
Note: This product must be installed by a qualified electrician.
Product Support
Manuals:
- QUBINO Z-Wave Dimmer InWall Installation Manual
- Guide to Configuring Z-Wave Devices with Vera UI7 (Size: 435 kB)
- Video Installation of Qubino Light Modules
Dimmer Technical Specifications
RF Protocol
|
Z-Wave Plus™ , SDK version: 6.51.03
|
RF Frequency
|
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
|
Application
|
Indoor use only
|
Power
|
0.6 A / 230 VAC
0.85 A / 30 VDC
|
Operation Range
|
50m with no obstacles
|
Enclosure
|
ABS
|
Comliance
|
EN 60669-2-1
|
Operating Temp. | -10C ~ +40C |
Dimensions
|
41.8mm x 36.8mm x 15.4mm
|