Fibaro Z-Wave Flood Water Leak Sensor

Fibaro Z-Wave Flood Water Leak Sensor

The Fibaro Z-Wave Flood Water Leak Sensor is a universal, Z-Wave compatible, flood and temperature sensor.

The Fibaro Z-Wave Flood Water Leak Sensor device can be battery (ca. 2 years battery life) or VDC powered (12 or 24 VDC).

The flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening a NC contact.

The device has built in temperature sensor, monitoring temperature of e.g. floor.

 

 

The Fibaro Z-Wave Flood Water Leak Sensor is designed to be placed on the floor or on a wall with a flood sensor probe extended by connected wire.

The device has built in LED indicator and acoustic alarm.

In addition, the sensor is equipped with a tilt sensor reporting tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location.

LED diode signals flood, operating mode or the Z-Wave network communication range.

Fibaro Z-Wave Water Sensor is sink-proof, which means it drifts on the water surface and keeps on sending alarm signal in case of substantial inundation of water.

Products Details:

• Compatible with any Z-Wave Smart Hub
• May be connected to any alarm system (potential free output terminal)
• Extremely easy installation – simply put on a surface prone to flooding
• May be installed anywhere – flood sensor’s contacts extended with a wire
• Battery or VDC powered. When connected to an external, VDC power source, the battery serves as an emergency power source
• Theft protection – tilt is reported to the Z-Wave network or alarm system’s main controller
• Two operating modes – flood / temperature sensor or just a temperature sensor

Additional Resources

• Fibaro Flood Sensor – Product Video

Technical Specifications:

Product Name	Flood Sensor
Battery Type	CR123A
Operation Range	30m
Power	12 – 24 VDC (optional)
Radio frequency	921.42 MHz (AU/NZ Z-Wave)
Power Consumption	0,4W
Operation temperature	0 – 40C*
Measured temperature range	-20 to 100C
Temperature measuring accuracy	0,5 C
Housing	ABS
Size (Diameter x Height)	72 x 28 mm