Silver Fibaro Home Center 2
The Silver Fibaro Home Center 2 System is a Z-Wave gateway that is a wireless home controller which allows you to build and manage your own Z-Wave network.
- Extremely efficient hardware infrastructure
- Remote access via web or mobile phone
- Low energy consumption
- Geo localisation – allows you to track your family members
- SMS notifcation
- Advanced recovery system
- Maintains a history of events
The Silver Fibaro Home Center 2 System is the brain of the Fibaro system, or any Z-Wave based home automation system.
The Silver Fibaro Home Center 2 System interface gives you easy control over groups of devices responsible for the same function – for example, heating, air conditioning or garden watering.
Thanks to the Device Panels, you can easily schedule operations for groups of devices, based on the day of the week or the time of day.
Fibaro devices can be installed in any wall switch box, behind a light switch, roller shutter switch, etc. and are compatible with every electrical system.
They do not connect permanently to the building’s infrastructure so if you wish to redecorate your apartment, take down some walls and change your interior design they won’t be a problem. Simply take out any given module from the wall and install it in a new location. Thanks to mesh networking, the module will update its location and resume operation.
Almost all automation in the Silver Fibaro Home Center 2 System is controlled by ‘Scenes’.
These can, for example, turn lights on when motion is detected at particular times of day or make several things happen around your house with the push of a single button on your Z-Wave controller. Most of these scenes can be created using Fibaro’s excellent ‘Graphical Scene Editor’, but some more complex scenes are actually much easier to create using a LUA script, and in some cases can only be created using LUA.
LUA is a programming (scripting) language and is commonly used in home automation controllers to enable users to create more complex control scenes than those supported by the controller’s Scene editor. The Silver FIBARO Home Center 2 System scene editor enables you to use a graphical-based editor or a LUA-based editor.
For light users we also provide a smaller, less expensive system, the FIBARO Home Center Lite.
There is currently a known issue with some FIBARO Home Center 2 controllers not allowing parameter changes of non FIBARO devices, if you experience this issue please refer to the following guide Parameter Changes on Non FIBARO devices.
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
Z‐Wave device type
CPU: Intel Atom 1.6 GHz Processor
1 GB RAM
2GB SLC Hard Drive
4GB MLC Recovery Disk
Up to 30m indoors with no obstacles
Indoor use only
-10 ~ +40 °C
-10 ~ 70 °C, humidity 5~95% RH (max)