Left Z-Wave Keypad Lock MK2
The Left Z-Wave Keypad Lock MK2 offers the flexible versatility of a wireless and key-less locking solution with extra secure ANSI type mortise. The lock is integrated with the popular Left Z-Wave Keypad Lock MK2 network protocol which can be integrated into automation building solutions. It features a Master pin code, low battery warning, emergency key override and many more safety features for your convenience.
PRODUCT FEATURES
- Master code – Have the ability to change the Master code
- User codes – Program up to 10 different user codes
- Remote code change – Integrated into the Z-Wave device the automation management software has the ability to change the code remotely without being at the lock
- Z-Wave networking enabled – The wireless lock is a certified Z-Wave device which can be configured to any Z-Wave certified home automation or building automation system
- Remote unlocking – From the software interface the door can be unlocked remotely
- Illuminated keypad – The keypad does not have mechanical buttons which means your secret pin cannot be traced including Mechanical key barrel for manual override
- Low battery warning – The lock will emit a tone notifying the owner to replace the batteries; normal battery use is 12-16 months
WHAT’S IN THE BOX
- Electronic lock body front and rear with more secure ANSI mortise
- User guide – including manual operation and Z-Wave device commands
- Mechanical overkey keys – in case of power failure
- Screw kit and installation instructions – all hardware, striker plate, Phillips screws
Please note: for remote unlocking and wireless connection, this device requires Z-Wave home controller with AU/NZ RF 921.42MHz. Available functions may depend on the compatibility of your home controller software. We recommend Vera Edge Home Controller or Vera Plus
We also stock the Right Z-Wave Keypad Lock MK2 for your convenience.
Product Support
Important note: To extend battery lifetime in Left Z-Wave Keypad Lock MK2 (Left), as well as to avoid disconnecting from Vera Edge / Plus please ensure that you have switched off polling or set a very long polling period for your Left Z-Wave Keypad Lock MK2 in Vera Z-Wave gateway. Please replace the default value of 150 seconds with either 0 (no polling) or 36000 (10 hours). You can do it in your lock setting in the Vera interface.
TECHNICAL SPECIFICATIONS
Product Name
|
Z-Wave Keypad Lock MK2 (Left)
|
Powered by
|
4xAA High quality alkaline – 8,000 normal uses without using Z-Wave chip. The length of battery life will decrease when using the Z-Wave chip. Approximately 6-10 months of normal use
|
Operation Range
|
Up to 30m indoor
|
Door thickness
|
32-50 mm
|
Radio frequency
|
921.42 MHz (AU/NZ Z-Wave)
|
Fire rated
|
Cannot be used on afire door
|
Front/rear lock body
|
Die cast brushed stainless finish
|
Tubular latch | Zinc alloy 60/70 variable backset |
Handle
|
Zinc alloy die cast stainless finish
|
Housing
|
Zinc alloy
|
Weight
|
2.5 kg
|