Qubino Z-Wave Shutter DC Switch
TheQubino Z-Wave Shutter DC Switch is the world’s smallest Z-Wave module able to control 12-24V DC motors of blinds, rollers, shades and Venetian blinds.
- Z-Wave Plus certified
- Supports the connection of a temperature sensor
- Can measure the power consumption of connected device
Product Details
The Qubino Z-Wave Shutter DC Switch is a Z-Wave Plus (500 series) controller for blind, roller and shade motors with 12-24V DC motors. It is designed to fit into an existing switch and enables you to wirelessly control blind motors using a Z-Wave enabled (921.42 MHz in AUS/NZ) controller and reports the motors actual power (Watts) and total power consumption (kWh).
This device also supports precise positioning for motors equipped with mechanical or electronic switches.
The Qubino Z-Wave Shutter DC Switch allows the connection of a temperature sensor which can report the local temperature to your Z-Wave gateway allowing it to better meet your heating/cooling needs.
This product integrates with all Australian certified (921.42 MHz) Z-Wave Controllers including;
Configuring Z-Wave Devices:
Z-Wave devices often have several configurable parameters which you can change using your Vera’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.
Every available configurable parameter is listed in your device’s user manual.
Product Support
Manuals:
Videos / YouTube:
Technical Specifications
RF Protocol
|
Z‐Wave Plus (500 series chip)
|
RF Frequency
|
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
|
Z‐Wave device type
|
Z-Wave binary switch, routing slave
|
Power
|
12-24V DC ± 10%
|
Rated Load Current
|
2A
|
Overcurrent Protection
|
5A
|
Output circuit power of DC output (resistive load)
|
48W (24V DC)
|
Operation Range
|
Up to 30m indoors (with no obstacles)
|
Application
|
Indoor use only
|
Operation temperature
|
10 ~ 40 °C
|
Storage temperature
|
‐10 ~ 60 °C
|
Weight
|
30g
|
Dimensions
|
41.8mm x 36.8mm x 16.9mm
|