CLIPSAL Saturn Z Wave 2 Gang Dimmer – Smart Z-Wave Dimmer Switch
This is an updated version of the CLIPSAL Saturn Z Wave 2 Gang Dimmer Lighting Set with improved functionality.
This CLIPSAL Saturn Z Wave 2 Gang Dimmer set allows you to control a two lighting circuit with Z-Wave.
It allows for remote control using a connected Z-Wave gateway or manual control using the momentary/push buttons.
The set contains:
- Two QUBINO Z-Wave Dimmer InWall Controllers
- One Clipsal 2 Gang Saturn Series Wall Plate
- Two Clipsal Saturn momentary/push buttons
The QUBINO Z-Wave Dimmer InWall Controller (by GOAP) includes additional features compared to the previous dimmer used in this set.
It uses the latest 500 Series Z-Wave chip, has a greater communication range and is fully integrated with Vera ADD Wizards as “Qubino Flush Dimmer ZMNHDD1”.
It also allows for 2-3 way wired switching.
Z-Wave 2 Dim Clipsal Saturn Series Wall Plates are available in the following colours; Espresso Black, Ocean Mist and Pure White. Please specify the colour in your order comments.
An LED option is available for the Clipsal buttons.
The LED is always on and helps you to locate the button in the dark.
You can order the LED option for your buttons by clicking here.
Note: This product must be installed by a qualified electrician.
- CLIPSAL Saturn Z Wave 2 Gang Dimmer Installation Manual
- Guide to Configuring Z-Wave Devices with Vera UI7
- Video Installation of Qubino Light Modules
Dimmer Technical Specifications
Z-Wave Plus™ , SDK version: 6.51.03
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
Indoor use only
0.6 A / 230 VAC
0.85 A / 30 VDC
Up to 30m indoors with no obstacles
|-10C ~ +40C
41.8mm x 36.8mm x 15.4mm