Qubino Z-Wave Shutter DC Switch
TheQubino Z-Wave Shutter DC Switch is the world’s smallest Z-Wave module able to control 12-24V DC motors of blinds, rollers, shades and Venetian blinds.
- Z-Wave Plus certified
- Supports the connection of a temperature sensor
- Can measure the power consumption of connected device
The Qubino Z-Wave Shutter DC Switch is a Z-Wave Plus (500 series) controller for blind, roller and shade motors with 12-24V DC motors. It is designed to fit into an existing switch and enables you to wirelessly control blind motors using a Z-Wave enabled (921.42 MHz in AUS/NZ) controller and reports the motors actual power (Watts) and total power consumption (kWh).
This device also supports precise positioning for motors equipped with mechanical or electronic switches.
The Qubino Z-Wave Shutter DC Switch allows the connection of a temperature sensor which can report the local temperature to your Z-Wave gateway allowing it to better meet your heating/cooling needs.
This product integrates with all Australian certified (921.42 MHz) Z-Wave Controllers including;
Configuring Z-Wave Devices:
Z-Wave devices often have several configurable parameters which you can change using your Vera’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.
Every available configurable parameter is listed in your device’s user manual.
Videos / YouTube:
Z‐Wave Plus (500 series chip)
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
Z‐Wave device type
Z-Wave binary switch, routing slave
12-24V DC ± 10%
Rated Load Current
Output circuit power of DC output (resistive load)
48W (24V DC)
Up to 30m indoors (with no obstacles)
Indoor use only
10 ~ 40 °C
‐10 ~ 60 °C
41.8mm x 36.8mm x 16.9mm