Fibaro Z-Wave Dimmer Bypass 2
$22.00
Fibaro Z-Wave Dimmer Bypass 2 – FGB002
Quick Overview
The Fibaro Z-Wave Dimmer Bypass 2 is a supplementary device to the Fibaro Z-Wave Dimmer 2 allowing it to control lamps which use at least 5W.
- Easy to use and install
- Supports low power lamps such as LEDs or energy saving compact fluorescent lamps
Product Details
The Fibaro Z-Wave Dimmer Bypass 2 is designed to support Fibaro Z-Wave In-Wall Dimmer 2 by enabling it to control and dim lights which draw minimum 5W (e.g. LED lighting).
It can be used in case of connecting LED bulbs or energy saving compact fluorescent lamps.
This Fibaro Z-Wave smart module prevents flickering of the LED lights and glowing of the turned off compact fluorescent lamps.
In the case of 2-wire connection, it allows to reduce minimum power of load required by the Fibaro Dimmer 2 for correct operation.
Fibaro Z-Wave Dimmer Bypass 2 provides powering of the Fibaro Dimmer 2 in case of controlling the low loads of minimum power down to 5VA (for cosφ>0.5)
IMPORTANT NOTE BEFORE PURCHASING
- The Fibaro Z Wave Dimmer 2 Switch must be installed by a qualified electrician.
- Before engaging an electrician, check that they provide a warranty and electrical compliance certificate.
- For warranty claim you have to provide an installation compliance certificate from your electrician.
Product Support
- Fibaro Z-Wave Dimmer Bypass 2 Manual
- Fibaro System and technology Overview
- Fibaro Z Wave Dimmer 2 Switch Operating Manual
Technical Specifications
|
Application
|
Indoor use only
|
|
Operation temperature
|
0 ~ 35 °C
|
|
Power Consumption
|
less then 1.2W
|
|
Weight
|
35g
|
|
Power Supply
|
220 – 240 V ~ 50 Hz
|
|
Dimensions
|
(L x W x H) 31mm x 21.6mm x 13mm
|
|
Compliance
|
RoHS 2011/65/EU, LVD 2006/95/EU, EMC 2004/108
|
Related products
Smart Modules
Smart Controllers
