Z-Wave Smart Water Valve Actuator
$184.00 GST Incl.
Out of stock
Z-Wave Smart Water Valve Actuator
The Z-Wave Smart Water Valve Actuator allows you to remotely turn ON/OFF a water valve using Z-Wave wireless protocol (921.42 MHz in Australia) and Z-Wave Gateway.
700 series Z-Wave chip which is the newest technology from Silicon Labs.
Great wireless range
700 series Z-Wave chip provides the best platform for wirelessly connected devices.
With a wireless range above 100 meters, Z-Wave devices can now communicate 250% further using significantly less power.
Faster control
The Z-Wave Smart Water Valve Actuator is all about control and automation.
The Z-Wave 700 series does it fast. An 18% more powerful CPU is coupled with wireless transfers reaching 100 kbit/s and instantaneous security.
The 700 series Z-Wave chip performing much faster than all competitors.
Easy DIY Installation – No Plumber Needed
The Z-Wave Smart Water Valve Actuator is easily installed over existing valves without needing a plumber.
All you need is a screwdriver, to take control of your own plumbing.
The Z-Wave Smart Water Valve Actuator ensures that you never have to deal with burst pipes or leaks that not only spoil your day but damage your home.
The Z-Wave Smart Valve Actuator can not only automate your water main house feed or anything else that uses a quarter-turn ball valve, but it can also turn off your water automatically when leaks are detected or when you travel out of town.
PRODUCT FEATURES
- Works on quarter-turn ball valves up to 1-1/2″
- Z-Wave Chip 700
- Installs on top of your existing water valve (no plumber necessary)
- Z-Wave Plus certified
- Built-in Z-Wave Range Extender
- Single tool installation
The Z Wave Smart Valve Actuator allows you to remotely turn ON/OFF a water valve using Z-Wave Controller. You can use it to automate your water boiler, irrigation system, radient heat system or anything else that uses a quarter-turn ball valve.
The Z Wave Smart Valve Actuator installs on top of your existing water valve with a single Phillips screwdriver. No plumber necessary!
Use this device alongside a Z-Wave Water Sensor to automatically close your water valve when a leak is detected to greatly decrease the extent of water damage. Sleep easy knowing that your home is safe from water damage even when you are on vacation.
This product is compatible with all Australian certified (921.42MHz) Z-Wave and Z-Wave Plus controllers including:
- Vera Edge/Plus
- Fibaro Home Center 3 / 2 / Lite
TECHNICAL SPECIFICATIONS
|
RF Protocol
|
Z‐Wave Plus (700 series chip)
|
|
RF Frequency
|
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
|
|
Z‐Wave device type
|
Z-Wave Switch
|
|
Power
|
12 VDC
|
|
Power Consumption
|
0.13W
|
|
Operation Range
|
Up to 100m indoors (with 700 Controller)
|
|
Application
|
Indoor use only or under cover
|
|
Mounting Options
|
Quarter-Turn Valves from 1/2″ to 1-1/2″
|
|
Operation Temperature
|
5 ~ 40 °C
|
|
Storage temperature
|
‐10 ~ 50 °C
|
|
Weight
|
1.3kg
|
|
Dimensions
|
15mm x 89mm x 188mm
|
|
Housing
|
ABS
|
ADDITIONAL RESOURCES
Related products
Smart Sensors
Smart Door Locks
Smart Controllers
