Qubino Z-Wave Flush 1 Switch

Qubino produces the Worlds smallest Smart Switch…introducing the Qubino Z-Wave Flush 1 Switch

The Qubino Z-Wave Flush 1 Switch is a Z-Wave module for switching on/off electrical devices such as lights, fans etc. The module can be controlled either through a Z-wave network or through the wall switch manually.

The Qubino Z-Wave Flush 1 Switch is designed to be mounted behind a traditional wall switch. Module measures power consumption of load and supports connection of a digital temperature sensor. It is designed to act as repeater in order to improve range and stability of Z-Wave network.

Supported switches

The Qubino Z-Wave Flush 1 Switch supports mono-stable switches (push button) and bi-stable switches. The module is factory set to operate with traditional bi-stable switches that you flick on/off.

PRODUCT FEATURES

• Compatible with any Z-Wave Controller.
• Compatible with any Z-Wave Controller.
• Dimensions (W x H x D) 41,8 x 36,8 x 15,4mm
• Power monitoring accuracy P=5-50W, +/-3W; P˃50W, +/-3%;
• Digital temperature sensor range (sensor must be ordered separately) -50 ~ 125°C
• Support for the connection of digital temperature sensor (optional part)
• 2 binary inputs offer the option to connect additional devices such as sensors, switches/push buttons, etc, …

Product Support

Configuring Z-Wave Devices:

• Z-Wave devices often have several configurable parameters which you can change using your Vera’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.
• Every available configurable parameter is listed in your device’s user manual. In most cases your device’s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section.

Note: Do not connect the Qubino Z-Wave Flush 1 Switch to loads exceeding recommended values. Connect the module only in accordance to the manual and diagrams below. Use only qualified electrician if uncertain.

Manuals:

• Qubino Z-Wave Flush 1 Switch Installation Manual
• Guide to Configuring Z-Wave Devices with Vera UI7

Videos / YouTube:

• The smallest Z-Wave module
• QUBINO Single switch
• Qubino Z-Wave Flush 1 Switch Installation Video

TECHNICAL SPECIFICATIONS

Product Name	Flush 1 Relay
Powered by	24V DC or 240V AC
Operation Range	30m
Max Load	2300W (230VAC)
Radio frequency	921.42 MHz (AU/NZ Z-Wave)
Power Consumption	0,4W
Operation temperature	-10 -+40 C*
Measured temperature range	0,5o C (within 0o C – 40o C range) (optional sensor)
Temperature measuring accuracy	0,5 C
Housing	ABS
Dimensions (W x H x D)	41,8 x 36,8 x 15,4mm